Note: The firearm you are viewing is a USED Adams Patent Model 1851 Percussion Revolver .50 Caliber.
The photo shown is the actual pistol that's for sale, the description below is as we see it.
About the Gun:
This Adams Revolver was believe to be manufactured around the 1855-1856 period
This revolver has the matching "R" suffix on both the frame and the cylinder serial No. 15473 R.
This confirms that this revolver is an all-matching, factory-original piece built directly in Robert Adams' own workshops.
Rather than a later reassembled revolver or a third-party licensee build.
The Top strap inscription when reading the engraving along the top of the frame directly above the cylinder confirm the exact retailer/workshop name.
Name being Deane, Adams & Deane, 30 King Street William St, London Bridge (which places it firmly before the firm split in mid-1856).
With a 6-inch barrel it identifies the revolver as the standard officer's / belt-size (or large holster-size) Model 1851 Adams revolver.
The bore diameter across the muzzle roughly measures 12.7mm making it a .50 Caliber.
Also the lower front of the frame web is marked DA&D 54, confirming its caliber.
The quintessential British military and colonial sidearm configuration of the mid-1850s.
General Description of Pistol:
Originally finished in a deep, glossy rust blue (charcoal/chemical London bluing) that looked dark blue-black when new.
But over the last 170 odd years, this surviving example has typically faded to a smooth plum-brown or silvery-grey finish.
The barrel and frame are almost entirely smooth and are essentially free of any significant pitting apart for a small area above the trigger.
Over the whole revolver it shows evenly scattered areas of moderately oxidized surface freckling and pinpricking present.
There are also a few small patches more moderate surface oxidation on the rear face of the frame.
Barrel seems surprisingly in great condition along with the cylinder.
Comes in a wooden box (not original) with flask, nipple key, cap tin oil Bottle and Brass bullet mould.
Product Overview:
We would like to think we under rate all our second hand firearms, to give the best possible accurate description of their overall condition.
If it's not what we say, we guarantee a full refund.
IMPORTANT NOTICE: Pistols, Restricted Firearms, Prohibited Firearms, Prohibited Magazines & PCCK's
With all purchases of Pistol, Restricted Weapon, Prohibited Firearm or Prohibited Magazine and or Pistol Carbine Conversion Kits you must in the first instance be a holder of a current firearms license with the appropriate B, C, D or P Endorsement.
Being the holder of the correct endorsement on your firearms licence you can purchase any Pistol, Restricted Weapon, Prohibited Firearm or Prohibited Magazine and or Pistol Carbine Conversion Kits from this website at any time. However the purchase is held in your name by Gun Supplies and cannot be released until such time as all the correct documentation is received by us.
After purchasing a Pistol, Restricted Weapon, Prohibited Firearm or Prohibited Magazine and or Pistol Carbine Conversion Kits you need to make an application for a Permit to Possess using form FRM 67A-RP or form FRM67A-PCCK for Pistol Carbine Conversion Kits as found on the Firearms Safety Authority Website.
This application must be taken down or sent to your local Arms Office, the approval of the permit is undertaken by them and they will issue the Permit to Possess. Upon the receipt of the permit, all copies must be send to Gun Supplies or brought with you when picking up from us. We will except PDF copies (not photos) send to us by email only.
When Gun Supplies receives the Permit to Possess, we will ship your purchase via Dealer to Dealer.
Gun Supplies recommends that if you are unsure of the correct procedure when purchasing Restricted or Prohibited Firearms from us, you contact us by phone in the first instance or email to discuss the procedure.
All Enquiries Email: don@gunsupplies.co.nz Phone: 027 496 0884
Monday - Friday: 10:00AM to 4:30PMSaturday: ClosedSunday: Closed
© Copyright 2025 Gun Supplies Limited. All Rights Reserved.
![]()
